|The existing site is listed as a historic industrial area containing an old butchery complex, which included the water-tower and old butcher hall.
The demand of the National heritage was to rebuild the tower as it was in its original state and to integrate the main façade portal of
the old hall in front of the planned new shopping mall. The client wished for the design to be a prefabricated concrete hall of 46x42x7 meters.
With the interior and all internal finishing done as "Mercator standard" – the standard which is prescribed by the shopping company's
chain for all their standard malls. The construction company's budget was extremely limited, after detailed calculation
the budget for cladding all elevations was at 60.000 EUR. The proposed pattern was based on different stepped elevations
in order to soften the basic cube shell. The surface that would be needed for one side was then calculated.
The surface was divided into three elevated surfaces.
The surface which could fit into the budget for the facade was the use of basic metal sheets which were painted bronze in color.
After a cost evaluation it was discovered that only 20% of the concrete shell could be covered with the metal sheets.
So the sheets were perforated with holes in different sizes.
Furthermore the cut metal circles from the sheets were used and arranged on the rest of the façade surface.
The use of the holes and the circular ornamental patterns were justified with the commercial merchant's
company "Mercator pika* (*pika in slovene - dot)" (campaign for faithful customers).
For the remaining budget, the metal chain rope was created around the metal dots. In time the surface will be covered with green climbing plants.
Climbing plants (evergreen) are placed around the building which will slowly cover the elevations and will become eco-green.
|Dot envelope _ low cost shopping